IPv6 Commands
page 30-54 OmniSwitch 6250 CLI Reference Guide November 2009
show ipv6 information
Displays IPv6 information.
show ipv6 information
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ipv6 information
Default hop limit = 64
Path MTU entry minimum lifetime (min) = 60
Neighbor stale lifetime (min) = 1440
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
Default hop limit The value placed in the hop limit field in router advertisements
Path MTU entry minimum
lifetime
Minimum lifetime for entries in the path MTU.
Neighbor stale lifetime Minimum lifetime for neighbor entries in the stale state.
ipv6 neighbor Configures a static entry in the IPv6 Neighbor Table.
ipv6 pmtu-lifetime Configures the minimum lifetime for entries in the path MTU
Table.
ipv6 hop-limit Configures the value placed in the hop limit field in the header of
all IPv6 packet.
To Next Page
Loading...
