Session Management Commands
page 6-26 OmniSwitch 6250 CLI Reference Guide November 2009
exit
Ends the current CLI session. If the CLI session to the switch was via Telnet, the connection is closed.
exit
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If changes were made using the CLI and have not been saved with the copy running-config working
command, a warning message appears asking to confirm the user exit. To save changes, enter N at the
warning prompt and use the copy running-config working command.
Examples
-> exit
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
SessionMgr
sessionIndex
sessionRowStatus
kill Kills an active session. The command takes effect immediately.
To Next Page
Loading...
