Alcatel-Lucent OmniSwitch 6250 - Show Aaa Authentication 802.1 X

AAA Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 43-61
show aaa authentication 802.1x
Displays information about the global 802.1X configuration on the switch.
show aaa authentication 802.1x
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command displays information about 802.1X settings configured through the aaa authentication
802.1x command.
Examples
-> show aaa authentication 802.1x
1rst authentication server = nms-vlan-30,
port usage = unique
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
1st authentication server The first server to be polled for authentication information. Any backup
servers are also displayed on subsequent lines.
port usage Whether 802.1X ports on the switch will only accept frames from the
supplicant’s MAC address after successful authentication (unique); or
the switch will accept any frames on 802.1X ports after successful
authentication (global)
aaa authentication 802.1x Enables/disables the switch for 802.1X authentication.