IP Commands
page 29-70 OmniSwitch 6250 CLI Reference Guide November 2009
icmp messages
Enables or disables all Internet Control Message Protocol (ICMP) messages.
icmp messages {enable | disable}
Syntax Definitions
enable Enables ICMP messages.
disable Disables ICMP messages.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> icmp messages enable
-> icmp messages disable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaIcmpCtrl
alaIcmpAllMsgStatus
parameter default
enable | disable enable
icmp type Enables or disables a specific type of ICMP message, and sets the
minimum packet gap.
show icmp control Allows the viewing of the ICMP control settings.
To Next Page
Loading...
