Network Time Protocol Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 5-19
show ntp keys
Displays information about all authentication keys.
show ntp keys
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command displays information about the authentication keys loaded into the memory.
Examples
-> show ntp keys
Key Status
=======+============
1 untrusted
2 untrusted
3 trusted
4 trusted
5 untrusted
6 untrusted
7 trusted
8 trusted
Release History
Release 6.6.1; command was introduced.
output definitions
Key The key number corresponding to a key in the key file.
Status Whether the key is trusted or untrusted.
To Next Page
Loading...
