IP Multicast Switching Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 41-93
show ipv6 multicast neighbor
Displays the MLD neighbor table entries of IPv6 Multicast Switching and Routing.
show ipv6 multicast neighbor
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ipv6 multicast neighbor
Total 2 Neighbors
Host Address VLAN Port Static Count Life
-------------------------+-----+-----+-------+------+-----
fe80::2a0:ccff:fed3:2853 1 2/1 no 1 6
:: 1 2/13 yes 0 0
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
Host Address The IPv6 address of the IPv6 multicast neighbor.
VLAN The VLAN associated with the IPv6 multicast neighbor.
Port The slot and port number of the IPv6 multicast neighbor.
Static Whether it is a static MLD neighbor or not.
Count Displays the count of the IPv6 multicast neighbor.
Life The life time of the IPv6 multicast neighbor.
ipv6 multicast static-neighbor Creates a static MLD neighbor entry on a specified port on a specified
VLAN.
To Next Page
Loading...
