Alcatel-Lucent OmniSwitch 6250 - Lacp Linkagg Partner Admin Key

Link Aggregation Commands
page 12-20 OmniSwitch 6250 CLI Reference Guide November 2009
lacp linkagg partner admin key
Configures the administrative key for the dynamic aggregation group’s remote partner.
lacp linkagg agg_num partner admin key partner_admin_key
lacp linkagg agg_num no partner admin key
Syntax Definitions
agg_num The number corresponding to the dynamic aggregate group.
partner_admin_key The administrative key for the dynamic aggregation group’s remote
partner. Possible values are 0–65535.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the no form of this command to remove a partner admin key from a dynamic aggregate group.
Examples
-> lacp linkagg 3 partner admin key 1
-> lacp linkagg 3 no partner admin key
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggPartnerAdminKey
parameter default
partner_admin_key 0
lacp linkagg size Creates a dynamic aggregate group.
show linkagg Displays information about static and dynamic (LACP) aggregate
groups.