IP Multicast Switching Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 41-95
show ipv6 multicast querier
Displays the MLD querier table entries of IPv6 Multicast Switching and Routing.
show ipv6 multicast querier
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ipv6 multicast querier
Total 2 Queriers
Host Address VLAN Port Static Count Life
-------------------------+-----+-----+-------+------+-----
fe80::2a0:ccff:fed3:2853 1 2/1 no 1 6
:: 1 2/13 yes 0 0
Release History
Release 6.6.1; command was introduced
Related Commands
output definitions
Host Address The IPv6 address of the IPv6 multicast querier.
VLAN The VLAN associated with the IPv6 multicast querier.
Port The slot and port number of the IPv6 multicast querier.
Static Whether it is a static MLD neighbor or not.
Count Displays the count of the IPv6 multicast querier.
Life The life time of the IPv6 multicast querier.
ipv6 multicast static-querier Creates a static MLD querier entry on a specified port on a specified
VLAN.
To Next Page
Loading...
