Alcatel-Lucent OmniSwitch 6250 - Lldp Transmit Hold-Multiplier

802.1AB Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 13-3
lldp transmit hold-multiplier
Sets the transmit hold multiplier value, which is used to calculate the Time To Live TLV.
lldp transmit hold-multiplier num
Syntax Definitions
num The transmit hold multiplier value. The valid range is 2-10.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• The LLDP protocol must be enabled before using this command.
• The Time To Live is a multiple of transmit interval and transmit hold multiplier.
Examples
-> lldp transmit hold-multiplier 6
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
lldpConfiguration
lldpMessageTxHoldMultiplier
parameter default
num 4
lldp transmit interval Sets the transmit time interval for LLDPDUs.
show lldp local -system Displays local system information.