802.1X Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 44-33
show 802.1x device classification policies
Displays device classification policies configured for 802.1x ports.
show 802.1x device classification policies [slot/port]
Syntax Definitions
slot/port The slot and port number of the 802.1x port for which you want to
display the policy configuration.
Defaults
All device classification policies for all 802.1x ports are displayed.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the slot/port parameter to display device classification policies for a specific 802.1X port.
Examples
-> show 802.1x device classification policies
Device classification policies on 802.1x port 2/26
Supplicant:
authentication, block
Non-Supplicant:
block
Device classification policies on 802.1x port 2/47
Supplicant:
authentication, block
Non-Supplicant:
block
Device classification policies on 802.1x port 2/48
Supplicant:
authentication, vlan 247, default-vlan
Non-Supplicant:
authentication:
pass: group-mobility, block
fail: strict-vlan 347, default-vlan
-> show 802.1x device classification policies 2/48
Device classification policies on 802.1x port 2/48
Supplicant:
authentication, vlan 247, default-vlan
Non-Supplicant:
authentication:
pass: group-mobility, block
fail: strict-vlan 347, default-vlan
To Next Page
Loading...
