802.1X Commands
page 44-32 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
dot1xAuthStatsTable
dot1xAuthEapolFramesRx
dot1xAuthEapolFramesTx
dot1xAuthEapolStartFramesRx
dot1xAuthEapolLogoffFramesRx
dot1xAuthEapolRespIdFramesRx
dot1xAuthEapolRespFramesRx
dot1xAuthEapolReqIdFramesTx
dot1xAuthEapolReqFramesTx
dot1xAuthInvalidEapolFramesRx
dot1xAuthEapLengthErrorFramesRx
dot1xAuthLastEapolFrameVersion
dot1xAuthLastEapolFrameSource
EAPOL frames transmitted
The number of EAPOL frames of any type that have been transmitted
by the switch.
EAPOL Start frames received
The number of EAPOL Start frames that have been received by the
switch.
EAPOL Logoff frames
received
The number of EAPOL Logoff frames that have been received by the
switch.
EAP Resp/Id frames received
The number of EAP Resp/Id frames that have been received by the
switch.
EAP Response frames
received
The number of valid EAP Response frames (other than Resp/Id frames)
that have been received by the switch.
EAP Req/Id frames
transmitted
The number of EAP Req/Id frames that have been transmitted by the
switch.
EAP Req frames
transmitted
The number of valid EAP Request frames (other than Req/Id frames)
that have been transmitted by the switch.
EAP length error frames
received
The number of EAPOL frames that have been received by the switch
for which the Packet Body Length field is invalid.
Invalid EAPOL frames
received
The number of EAPOL frames that have been received by the switch
for which the frame type is not recognized by the switch.
802.1x captive-portal address Displays information about ports configured for 802.1X.
output definitions (continued)
To Next Page
Loading...
