Alcatel-Lucent OmniSwitch 6250 - Show Ethernet-Service Sap-Profile

VLAN Stacking Commands
page 24-46 OmniSwitch CLI Reference Guide November 2009
show ethernet-service sap-profile
Displays the profile attribute configuration for VLAN Stacking Service Access Point (SAP) profiles.
show ethernet-service sap-profile sap-profile-name
Syntax Definitions
sap-profile-name Alphanumeric string of up to 32 characters. Use quotes around string if
the profile name contains multiple words with spaces between them
(e.g., “Alcatel-Lucent Engineering”).
Defaults
By default, all SAP profiles are displayed if a SAP profile name is not specified with this command.
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
• Specify a SAP profile name to display attributes for a single SAP profile.
• The ingress bandwidth value is displayed in megabytes.
• The Tri-Color Marking (TCM) parameter values (CIR, CBS, PIR, and PBS) are displayed in kilobytes.
For more information about TCM, see the “Configuring QoS” chapter in the OmniSwitch 6250
Network Configuration Guide.
Examples
-> show ethernet-service sap-profile
Profile Name Ingress Bandwidth Inner Tag Priority Priority
Bandwidth Sharing Option Mapping Value CIR CBS PIR PBS
-------------------+---------+--------+----------+--------+--------+---+---+---+---
default-sap-profile 0 Enable Preserve fixed 0 0 0 0 0
sap-video1 20 Disable Preserve in-out P 10 4 20 40
sap-video2 10 Disable Preserve in-out DSCP 100 10 0 0
sap-data1 15 Enable Translate fixed 3 0 0 0 0
-> show ethernet-service sap-profile sap-video1
Profile Name Ingress Bandwidth Inner Tag Priority Priority
Bandwidth Sharing Option Mapping Value
--------------------+----------+-------------+-----------+----------+-----------+
sap-video1 20 Disable Preserve in-out P
output definitions
Profile Name The name of the SAP profile.
Ingress Bandwidth The maximum amount of ingress bandwidth (1 = 1,000,000 mbps) to
allow for SAP ports.