Alcatel-Lucent OmniSwitch 6250 - Qos Clear Log

QoS Commands
page 38-28 OmniSwitch CLI Reference Guide November 2009
qos clear log
Clears messages in the current QoS log.
qos clear log
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command is useful for clearing messages from a large log file so that the file is easier to view. Logs
can get large if invalid rules are configured on the switch, or if a lot of QoS events have taken place. Clear-
ing the log makes the file easier to manage.
Examples
-> qos clear log
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaQoSConfigTable
alaQoSConfigClearLog
qos log lines Configures the number of lines in the QoS log.
debug qos Configures the type of QoS events that will be displayed in the QoS log.
show qos log Displays the log of QoS events.