QoS Policy Commands
page 39-204 OmniSwitch CLI Reference Guide November 2009
show policy validity period
Displays information about policy validity periods.
show policy validity period [name]
Syntax Definitions
name The name of the validity period.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Information for all validity periods is displayed unless name is specified.
• Use the show policy rule command to display the validity period that is associated with a policy rule.
Examples
-> show policy validity period
ValidityPeriod From
vp01 cli
*Days : tuesday thursday
*Months: january february
*Hours : 13:00 - 14:00
vp02 cli
*Days : monday wednesday
*Hours : 9:00 - 10:00
-> show policy validity period vp01
ValidityPeriod From
vp01 cli
*Days : tuesday thursday
*Months: january february
*Hours : 13:00 - 14:00
output definitions
ValidityPeriod The name of the policy validity period, configured through the policy
validity period command. A plus sign (+) preceding a policy rule name
indicates that the policy rule has been modified or has been created
since the last qos apply.
From Where the validity period originated: cli indicates that the entry was
configured on the switch; ldap indicates the entry was configured
through PolicyView.
To Next Page
Loading...
