IP Multicast Switching Commands
page 41-80 OmniSwitch 6250 CLI Reference Guide November 2009
show ip multicast querier
Displays the IGMP querier table entries of IP Multicast Switching and Routing.
show ip multicast querier
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ip multicast querier
Total 2 Queriers
Host Address VLAN Port Static Count Life
---------------+-----+-----+-------+------+-----
1.0.0.2 1 2/1 no 1 250
0.0.0.0 1 2/13 yes 0 0
Output fields are described here:
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
Host Address The IP address of the IP multicast querier.
VLAN The VLAN associated with the IP multicast querier.
Port The slot and port number of the IP multicast querier.
Static Whether it is a static multicast neighbor or not.
Count Displays the count of the IP multicast querier.
Life The life time of the IP multicast querier.
ip multicast static-querier Creates a static IGMP querier entry on a specified port on a specified
VLAN.
To Next Page
Loading...
