Alcatel-Lucent OmniSwitch 6250 - Show Qos Queue

QoS Commands
page 38-56 OmniSwitch CLI Reference Guide November 2009
show qos queue
Displays information for all QoS queues.
show qos queue
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
All queue information is displayed.
Examples
-> show qos queue
Slot/ Q Bandwidth Max Max Packets
Port VPN No Pri Wt Min Max Bufs Depth Xmit/Drop Type Action
4/7 102 0 0 - * * * * */* PRI (Default)
4/7 102 1 1 - * * * * */* PRI (Default)
4/7 102 2 2 - * * * * */* PRI (Default)
4/7 102 3 3 - * * * * */* PRI (Default)
4/7 102 4 4 - * * * * */* PRI (Default)
4/7 102 5 5 - * * * * */* PRI (Default)
4/7 102 6 6 - * * * * */* PRI (Default)
4/7 102 7 7 - * * * * */* PRI (Default)
output definitions
Slot/Port The physical slot/port numbers associated with the queue.
VPN The virtual port number associated with the queue.
Q No The queue number (0 through 7).
Pri The priority associated with the queue (0 through 7), configured
through the policy action priority command.
Wt The weight value assigned to each queue. Configured through the qos
default servicing mode and qos port servicing mode commands.
Bandwidth Max The maximum bandwidth requirement for the queue (the bandwidth
allowed by the maximum configured for all actions associated with the
queue). Configured through the policy action maximum bandwidth
command.
Max Bufs The number of buffers associated with the queue.