Alcatel-Lucent OmniSwitch 6250 - OmniSwitch 6250-P24 Rear Panel

CMM Commands
page 1-18 OmniSwitch 6250 CLI Reference Guide November 2009
show microcode
Displays microcode versions installed on the switch.
show microcode [working | certified | loaded]
Syntax Definitions
working Specifies the switch’s working directory; only microcode information
from the working directory will be displayed.
certified Specifies the switch’s certified directory; only microcode information
from the certified directory will be displayed.
loaded Specifies that only loaded (i.e., currently-active) microcode versions
will be displayed. Idle microcode versions will not be displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• If no additional parameters are entered (i.e., working, certified, or loaded), microcode information for
the running configuration will be displayed.
• This command can also be used on the secondary CMM.
Examples
-> show microcode
Package Release Size Description
-----------------+---------------+--------+-----------------------------------
Jbase.img 6.1.1.403.R01 10520989 Alcatel-Lucent Base Software
Jos.img 6.1.1.403.R01 1828255 Alcatel-Lucent OS
Jadvrout.img 6.1.1.403.R01 1359435 Alcatel-Lucent Advanced Routing