Alcatel-Lucent OmniSwitch 6250 - Ip Domain-Name

DNS Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 11-7
ip domain-name
Sets or deletes the default domain name for DNS lookups.
ip domain-name name
no ip domain-name
Syntax Definitions
name The default domain name for host lookups.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Use the no form of this command to delete the default domain name.
• Use this command to set the default domain name for DNS lookups.
Examples
-> ip domain-name company.com
-> no ip domain-name
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
systemDNS
systemDNSDomainName
ip domain-lookup Enables or disables the DNS resolver.
ip name-server Specifies the IP addresses of up to three servers to query on a host
lookup.
ipv6 name-server Specifies the IPv6 addresses of up to three IPv6 DNS servers to query
on a host lookup.
show dns Displays the current DNS resolver configuration and status.