802.1AB Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 13-23
show lldp local-system
Displays local system information.
show lldp local-system
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show lldp local-system
Local LLDP Agent System Data:
Chassis ID Subtype = 4 (MAC Address),
Chassis ID = 00:d0:95:e9:c9:2e,
System Name = Kite2_Stack_of_2,
System Description = 6.3.1.636.R01 Development, September 07, 2007.,
Capabilites Supported = Bridge, Router,
Capabilites Enabled = Bridge, Router,
LLDPDU Transmit Interval = 30 seconds,
TTL Hold Multiplier = 4,
LLDPDU Transmit Delay = 2 seconds,
Reintialization Delay = 2 seconds,
MIB Notification Interval = 5 seconds
Management Address Type = 1 (IPv4),
Management IP Address = 10.255.11.100,
output definitions
Chassis ID Subtype The subtype that describe chassis ID.
Chassis ID The chassis ID (MAC address).
System Name The name of the system.
System Description The description of the system.
Capabilites Supported The capabilities of the system.
Capabilites Enabled The enabled capabilities of the system.
LLDPDU Transmit Interval The LLDPDU transmit interval.
TTL Hold Multiplier The hold multiplier used to calculate TTL.
To Next Page
Loading...
