OmniSwitch 6250 CLI Reference Guide November 2009 page 19-1
19 Learned Port Security
Commands
Learned Port Security (LPS) provides a mechanism for controlling network device communication on one
or more switch ports. Configurable LPS parameters allow the user to restrict source learning on a port to:
• A maximum number of learned source MAC addresses.
• A specific amount of time in which source MAC addresses are learned.
• An individual learned source MAC address.
• A range of learned source MAC addresses.
This chapter includes descriptions of the CLI commands used to define LPS parameters and display infor-
mation about the current LPS configuration.
MIB information for Learned Port Security commands is as follows:
Filename: AlcatelInd1LearnedPortSecurity.mib
Module: ALCATEL-IND1-LPS-MIB
A summary of the available commands is listed here:
port-security
port-security shutdown
port-security maximum
port-security max-filtering
port-security convert-to-static
port-security mac
port-security mac-range
port-security violation
port-security release
port-security learn-trap-threshold
show port-security
show port-security shutdown
To Next Page
Loading...
