QoS Commands
OmniSwitch CLI Reference Guide November 2009 page 38-9
qos forward log
Enables the QoS software in the switch to send events to the policy server software in the switch in real
time. The policy server software may then be polled by an NMS application for logged events.
qos forward log
qos no forward log
Syntax Definitions
N/A
Defaults
By default, logged events are not sent to the policy server software in the switch.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
An NMS application may query the Policy Manager in the switch for logged events. Use the qos forward
log command to forward each event as it happens.
Examples
-> qos forward log
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaQoSConfigTable
alaQoSConfigForwardLog
qos log lines Configures the number of lines in the QoS log.
show qos log Displays the log of QoS events.
To Next Page
Loading...
