Chassis Management and Monitoring Commands
page 2-30 OmniSwitch 6250 CLI Reference Guide November 2009
show system
Displays basic system information for the switch. Information includes a user-defined system description,
name, administrative contact, and location, as well as object ID, up time, and system services.
show system
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command may be used when logged into the switch that performs either the primary or secondary
CMM role in a stack.
Examples
-> show system
System:
Description: 6.1.2.63.R02 Development, February 21, 2006.,
Object ID: 1.3.6.1.4.1.6486.800.1.1.2.1.6.1.2,
Up Time: 0 days 5 hours 20 minutes and 49 seconds,
Contact: Alcatel-Lucent, www.alcatel-lucent.com/enterprise/en,
Name: Kite_135,
Location: NMS_LABORATORY,
Services: 72,
Date & Time: FRI FEB 24 2006 16:21:30 (PST)
Flash Space:
Primary CMM:
Available (bytes): 31266816,
Comments : None
output definitions
System Description The description for the current system. This description shows the
current software version and the system date.
System Object ID The SNMP object identifier for the switch.
System Up Time The amount of time the switch has been running since the last system
reboot.
System Contact An user-defined administrative contact for the switch. This field is
modified using the system contact command.
System Name A user-defined text description for the switch. This field is modified
using the system name command.
To Next Page
Loading...
