LINK OAM Commands
page 26-26 OmniSwitch 6250 CLI Reference Guide November 2009
show efm-oam configuration
Displays the global LINK OAM configuration.
show efm-oam configuration
Syntax Definitions
N/A
Defaults
N/A.
Platforms Supported
OmniSwitch 6250.
Usage Guidelines
• Use this command to display the global configuration of LINK OAM.
Examples
-> show efm-oam configuration
EFM OAM Status : enabled,
Multiple PDU Count : 5
Output fields are described here:
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaDot3OamStatus
alaDot3OamMultiplePduCount
output definitions
EFM OAM status The current administrative status of LINK OAM on this switch
(Enabled or Disabled).
Multiple PDU Count The number of PDUs sent when LINK OAM needs to send multiple
Event Notification.
efm-oam Enables or disables the LINK OAM protocol on the switch.
show efm-oam port detail Displays the LINK OAM configuration and other related parame-
ters for a port.
To Next Page
Loading...
