Alcatel-Lucent OmniSwitch 6250 - Rrm

File Management Commands
page 7-34 OmniSwitch 6250 CLI Reference Guide November 2009
rrm
Removes a file from a non-primary switch in a stack.
rrm slot filepath
Syntax Definitions
slot The slot number of the non-primary switch in a stack.
filepath The name and path of the file to be deleted.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
On switches in a stacked configuration, this command deletes a file from any non-primary switch. You
must specify the slot number on these switches.
Examples
-> rrm 5 /flash/boot.params
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
chasSupervisionRfsLsTable
alcatelIND1ChassisSupervisionRfsCommands
chasSupervisionRfsCommandsSlot
chasSupervisionRfsCommandsCommand
chasSupervisionRfsCommandsSrcFileName
rcp Copies a file from a non-primary switch to a primary switch in a stack.
rls Displays the content of a non primary CMM in a switch or anon-pri-
mary switch in a stack.