IPv6 Commands
page 30-82 OmniSwitch 6250 CLI Reference Guide November 2009
show ipv6 rip interface
Displays information for all or specified RIPng interfaces.
show ipv6 rip interface [if_name]
Syntax Definitions
if_name IPv6 interface name.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you do not specify an interface, all IPv6 RIP interfaces are displayed.
Examples
-> show ipv6 rip interface
Interface Packets
Name Status Recvd Sent Metric
--------------------+----------+---------+--------+---------
Test_Lab Active 12986 12544 1
Test_Lab_2 Active 12556 12552 1
-> show ipv6 rip interface if3
Name = Test_Lab,
IPv6 interface index = 3,
Interface status = Active,
Next Update = 27 secs,
Horizon Mode = Split and Poison-reverse,
MTU size = 1500,
Metric = 1,
Send status = Enabled,
Receive status = Enabled,
Packets received = 12986,
Packets sent = 12544,
output definitions
Interface name Interface name.
IPv6 interface index IPv6 index of this interface.
Status Interface status (Active/Inactive).
Packets Recvd Number of packets received by the interface.
To Next Page
Loading...
