IPv6 Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 30-25
show ipv6 hosts
Displays IPv6 Local Hosts Table.
show ipv6 hosts [substring]
Syntax Definitions
substring Limits the display to host names starting with the specified substring.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you do not specify a substring, all IPv6 hosts are displayed.
Examples
-> show ipv6 hosts
Name IPv6 Address
-------------------------------------------+--------------------------------------
ipv6-test1.alcatel-lucent.com 4235::1200:0010
ipv6-test2.alcatel-lucent.com 4235::1200:0020
otheripv6hostname 4143:1295:9490:9303:00d0:6a63:5430:9031
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaIPv6HostTable
alaIPv6HostName
alaIPv6HostAddress
output definitions
Name Name associated with the IPv6 address.
IPv6 Address IPv6 address associated with the host name.
ipv6 host Configures a static host name to the IPv6 address mapping to the
local host table.
To Next Page
Loading...
