Distributed Spanning Tree Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 16-111
bridge rrstp
Enables or disables RRSTP on a switch.
bridge rrstp
no bridge rrstp
Syntax Definitions
N/A
Defaults
By default, RRSTP is disabled on the switch.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the no form of this command to disable RRSTP on the switch.
Examples
-> bridge rrstp
-> no bridge rrstp
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
vStpInfo
VStpRrstpGlobalState
bridge rrstp ring Creates a RRSTP ring comprising of two ports.
show bridge rrstp
configuration
Displays the current RRSTP status for the switch.
To Next Page
Loading...
