Web Management Commands
page 8-4 OmniSwitch 6250 CLI Reference Guide November 2009
http port
Changes the port number for the embedded Web server in the switch.
[ip] http port {default | port}
Syntax Definitions
ip Optional syntax.
default Restores the port to its default (80) value.
port The desired port number for the embedded Web server. The number
must be in the range 0 to 65535; well-known port numbers cannot be
configured.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
All WebView sessions must be terminated before entering this command.
Examples
-> http port 1025
-> http port default
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaIND1WebMgtConfigMIBGroup
alaIND1WebMgtHttpPort
parameter default
port 80
http server Enables/disables web management on the switch.
show http Displays web management configuration information.
To Next Page
Loading...
