CMM Commands
page 1-20 OmniSwitch 6250 CLI Reference Guide November 2009
show microcode history
Displays the archive history for microcode versions installed on the switch.
show microcode history [working | certified]
Syntax Definitions
working The history for the working directory’s microcode will be displayed.
certified The history for the certified directory’s microcode will be displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If no additional parameters are entered (i.e., working or certified), the microcode history for the running
directory will be displayed.
Examples
-> show microcode history
Archive Created 8/27/05 23:45:00
Release History
Release 6.6.1; command was introduced.
Related Commands
show microcode Displays microcode versions installed on the switch.
To Next Page
Loading...
