OmniSwitch 6250 CLI Reference Guide November 2009 page 36-1
36 Health Monitoring
Commands
The Health Monitoring function monitors the consumable resources of the switch (e.g., bandwidth usage,
CPU usage) and provides a single integrated resource for a Network Management System (NMS). This
function monitors the switch, and at fixed intervals, collects the current values for each resource being
monitored. Users specify resource threshold limits and traps are sent to an NMS if a value falls above or
below a user-specified threshold.
The Health Monitoring commands comply with RFC1212.
MIB information for the Health Monitoring commands is as follows:
Filename: AlcatelIND1Health.mib
Module: healthMIB
A summary of the available commands is listed here:
health threshold
health interval
health statistics reset
show health threshold
show health interval
show health
show health all
show health slice
show health fabric
To Next Page
Loading...
