Alcatel-Lucent OmniSwitch 6250 - Hot-Swapping Modules In a Stack; Removing Switches from an Existing Stack; Inserting Switches Into an Existing Stack

Network Time Protocol Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 5-5
ntp server unsynchronized
Disables an NTP client from invoking tests for NTP server synchronization. This allows the NTP client to
synchronize with unsynchronized NTP servers in the network.
ntp server unsynchronized
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
When NTP peer synchronization tests are disabled, the NTP client is able to synchronize with either an
NTP peer that is not synchronized with an atomic clock or a network of NTP servers that will finally
synchronize with an atomic clock.
Examples
-> ntp server unsynchronized
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaNtpConfig
alaNtpPeerTests
ntp server synchronized Enables an NTP client to invoke tests for NTP server synchronization as
specified by the NTP protocol.