Alcatel-Lucent OmniSwitch 6250 - Show Spantree Map-Msti

Distributed Spanning Tree Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 16-167
show spantree map-msti
Displays the Multiple Spanning Tree Instance (MSTI) that is associated to the specified VLAN.
show spantree mst vid vlan-map
Syntax Definitions
vid An existing VLAN ID number (1–4094).
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• This command is available when the switch is operating in either the 1x1 or flat Spanning Tree mode.
• Initially all VLANs are associated with the flat mode CIST instance (also known as MSTI 0).
Examples
-> show spantree 200 map-msti
Vlan Msti/Cist(0)
------+--------------------------
200 0
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
vStpMstVlanAssignmentTable
vStpMstVlanAssignmentVlanNumber
vStpMstVlanAssignmentMstiNumber
show spantree mst region Displays the MST region information for the switch.
show spantree msti vlan-map Displays the range of VLANs associated to the specified MSTI.
show spantree cist vlan-map Displays the range of VLANs associated to the CIST instance.