RIP Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 33-21
ip rip garbage-timer
Configures the RIP garbage timer value that defines the time interval, which must elapse before an expired
route is removed from the RIB.
ip rip garbage-timer seconds
Syntax Definition
seconds The RIP garbage timer value, in seconds. The valid range is 0–180.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
During the RIP garbage interval, the router advertises the route with a metric of INFINITY (i.e., 16 hops).
Examples
-> ip rip garbage-timer 180
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaProtocolRip
alaRipGarbageTimer
parameter default
seconds 120
show ip rip Displays the RIP status and general configuration parameters (e.g.,
forced hold-down timer).
To Next Page
Loading...
