Web Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 8-5
https port
Changes the default secure HTTP (HTTPS) port for the embedded Web server.
https port {default | port}
Syntax Definitions
default Restores the port to its default (443) value.
port The desired HTTPS port number. The number must be in the range 0 to
65535; well-known port numbers cannot be configured.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
All WebView sessions must be terminated before entering this command.
Examples
-> https port 1026
-> https port default
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaIND1WebMgtConfigMIBGroup
alaIND1WebMgtHttpsPort
parameter default
port 443
http server Enables/disables web management on the switch.
show http Displays web management configuration information.
To Next Page
Loading...
