Ethernet OAM Commands
page 25-48 OmniSwitch 6250 CLI Reference Guide November 2009
show ethoam cfmstack
Displays the contents of CFM Stack Managed Object, which determines the relationships among MEPs
and MIPs on a specific bridge port.
show ethoam cfmstack {port slot/port | linkagg agg_num}
Syntax Definitions
slot/port Slot and port number for which the contents of the configured MEP or
MIP will be displayed.
agg_num The aggregate ID for which the contents of the configured MEP or MIP
will be displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show ethoam cfmstack port 1/3
Up MHF Configured:
Vlan-id: 100,
Direction: up,
MAC-Address: 00:D0:95:EC:84:B0,
Maintenance Association: alcatel-sales,
Maintenance Domain: esd.alcatel-lucent.com,
MD-level: 3
Down MHF Configured:
Vlan-id: 100,
Direction: down,
MAC-Address: 00:D0:95:F6:33:DA,
Maintenance Association: alcatel-sales,
Maintenance Domain: esd.alcatel-lucent.com,
MD-level: 3
output definitions
Vlan-id The VLAN ID to which the MEP is attached.
Direction Indicates the direction (Inward or Outward) of the Maintenance Point
(MP) on the Bridge port.
MAC-Address The MEP ID configured on this port.
To Next Page
Loading...
