Ethernet OAM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 25-47
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
Dot1agCfmMepDb
dot1agCfmMepDbRMepIdentifier
dot1agCfmMepDbRMepState
dot1agCfmMepDbRMepFailedOkTime
dot1agCfmMepDbMacAddress
dot1agCfmMepDbPortStatusTlv
dot1agCfmMepDbInterfaceStatusTlv
OkFailed Time The time (SysUpTime) when the Remote MEP state machine last
entered either the RMEP_FAILED or RMEP_OK.
MacAddress The MAC address of the remote MEP.
Port Status Tlv The MAC status TLV last received.
I/f Status Tlv The interface status TLV last received.
show ethoam domain
association end-point
Displays the information of a specific MEP in a Management
Domain configured on the bridge.
output definitions (continued)
To Next Page
Loading...
