802.1AB Commands
page 13-4 OmniSwitch 6250 CLI Reference Guide November 2009
lldp transmit delay
Sets the minimum time interval between successive LLDPDUs transmitted.
lldp transmit delay seconds
Syntax Definitions
seconds The time interval between successive LLDPDUs transmitted, in
seconds. The valid range is 1-8192.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• The LLDP protocol must be enabled before using this command.
• The transmit delay is less than or equal to the multiplication of transmit interval and 0.25 (transmit
interval * 0.25).
Examples
-> lldp transmit delay 20
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
lldpConfiguration
lldpTxDelay
parameter default
seconds 2
lldp transmit interval Sets the transmit time interval for LLDPDUs.
show lldp local -system Displays local system information.
To Next Page
Loading...
