Alcatel-Lucent OmniSwitch 6250 - Show Health All

Health Monitoring Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 36-11
show health all
Displays health statistics for a specified resource on all active NI modules installed in the chassis.
show health all {memory | cpu | rx | txrx}
Syntax Definitions
memory Displays the RAM memory health statistics for all active NI modules in
the switch.
cpu Displays the CPU health statistics for all active NI modules.
rx Displays the health statistics for traffic received on all active NI
modules.
txrx Displays the health statistics for traffic both transmitted and received on
all active NI modules.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show health all memory
* - current value exceeds threshold
1 Min 1 Hr 1 Hr
Memory Limit Curr Avg Avg Max
-----------------+-------+------+------+-----+----
01 80 40 40 40 40
02 80 40 40 40 40
03 80 40 40 40 40
04 80 40 40 40 40
05 80 40 40 40 40
06 80 40 40 40 40
07 80 40 40 40 40
13 80 40 40 40 40