Health Monitoring Commands
page 36-12 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
healthModuleTable
healthModuleSlot
healthModuleRxLatest
healthModuleRx1MinAvg
healthModuleRx1HrAvg
healthModuleRx1HrMax
healthModuleRxTxLatest
healthModuleRxTx1MinAvg
healthModuleRxTx1HrAvg
healthModuleRxTx1HrMax
healthModuleMemoryLatest
healthModuleMemory1MinAvg
healthModuleMemory1HrAvg
healthModuleMemory1HrMax
healthModuleCpuLatest
healthModuleCpu1MinAvg
healthModuleCpu1HrAvg
healthModuleCpu1HrMax
output definitions
Memory (Cpu, TXRX, RX) A list of all currently-active NI modules (i.e., active slots) on the
switch. The column header corresponds with the resource keyword
entered. For example, if show health all cpu is entered, Cpu is used as
the column header.
Limit Current usage threshold for the specified resource type, on the corre-
sponding slot (in percent). The usage threshold refers to the maximum
amount of the resource’s total bandwidth that can be used by switch
applications before a notification is sent to the user. The default value
for all resource types is 80 percent. This threshold can be changed via
the health threshold command.
Curr Current usage of the resource on the corresponding slot, in percent (i.e.,
the amount of the resource’s total bandwidth actually being used by
switch applications).
1 Min Avg Average usage of the resource on the corresponding slot over a one
minute period.
1 Hr Avg Average usage of the resource on the corresponding slot over a one
hour period.
1 Hr Max The highest average hourly usage for the resource on the corresponding
slot.
show health Displays the health statistics for the switch.
health threshold Configures thresholds for input traffic (RX), output/input traffic
(TX/RX), memory usage, CPU usage, and chassis temperature.
To Next Page
Loading...
