GVRP Commands
page 23-20 OmniSwitch 6250 CLI Reference Guide November 2009
show gvrp statistics
Displays the GVRP statistics for all the ports, an aggregate of ports, or a specific port.
show gvrp statistics [linkagg agg_num | port slot/port]
Syntax Definitions
agg_num The number corresponding to the aggregate group.
slot/port The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
Defaults
By default, the GVRP statistics are displayed for all ports.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the agg_num or slot/port parameter with this command to display GVRP statistics for a specific port.
Examples
-> show gvrp statistics port 1/21
Port 1/21:
Join Empty Received : 8290,
Join In Received : 1526,
Empty Received : 0,
Leave Empty Received : 1,
Leave In Received : 0,
Leave All Received : 283,
Join Empty Transmitted : 826,
Join In Transmitted : 1532,
Empty Transmitted : 39,
Leave Empty Transmitted : 0,
Leave In Transmitted : 0,
Leave All Transmitted : 296,
Failed Registrations : 0,
Garp PDU Received : 1160,
Garp PDU Transmitted : 957,
Garp Msgs Received : 10100,
Garp Msgs Transmitted : 2693,
Invalid Msgs Received : 0
-> show gvrp statistics
Port 1/1:
Join Empty Received : 0,
Join In Received : 0,
Empty Received : 0,
Leave Empty Received : 0,
To Next Page
Loading...
