Chassis Management and Monitoring Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 2-31
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
system
systemContact
systemName
systemLocation
System Location The user-defined physical location of the switch. This field is modified
using the system location command.
System Services The number of current system services.
System Date & Time The current system date and time. This field is modified using the
system date and system time commands.
Flash Space: Primary CMM:
Available (bytes)
The available flash memory space available on the switch’s primary
management module.
Flash Space: Primary CMM:
Comments
Comments regarding the available flash memory space available on the
switch’s primary management module, if applicable.
system contact Specifies the switch’s administrative contact (e.g., an individual or a
department).
system name Modifies the switch’s current system name.
system location Specifies the switch’s current physical location.
output definitions (continued)
To Next Page
Loading...
