Session Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 6-33
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
SessionConfigTable
sessionType
sessionBannerFileName
sessionInactivityTimerValue
sessionDefaultPromptString
Login Timer in seconds The amount of time the user can take to accomplish a successful login
to the switch. If the timeout period is exceeded, the TCP connection is
closed by the switch.
Maximum number of Login
Attempts
The number of times a user can attempt unsuccessfully to log into the
switch before the TCP connection is closed.
session prompt Configures the default CLI prompt for console and Telnet sessions.
session banner Sets the file name of the user–defined banner.
session timeout Configures the inactivity timer for a CLI, HTTP (including Web-
View), or FTP interface.
session login-attempt Sets the number of times a user can attempt to log into the switch
unsuccessfully before the TCP connection is closed.
session login-timeout Sets the amount of time the user can take to accomplish a successful
login to the switch.
output definitions (continued)
To Next Page
Loading...
