Chassis Management and Monitoring Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 2-33
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
systemHardware
systemHardwareBootCpuType
systemHardwareFlashMfg
systemHardwareFlashSize
systemHardwareMemoryMfg
systemHardwareMemorySize
systemHardwareNVRAMBatteryLow
systemHardwareJumperInterruptBoot
systemHardwareJumperForceUartDefaults
systemHardwareJumperRunExtendedMemoryDiagnostics
systemHardwareJumperSpare
systemHardwareBootRomVersion
systemHardwareBackupMiniBootVersion
systemHardwareDefaultMiniBootVersion
systemHardwareFpgaVersionTable
systemHardwareFpgaVersionEntry
systemHardwareFpgaVersionIndex
NVRAM Battery OK The current status of the NVRAM battery. If the battery is OK, YES is
displayed in this field. If the battery charge becomes low, NO is dis-
played in this field.
BootROM Version The current BootROM version.
Backup Miniboot Version The current backup miniboot version.
Default Miniboot Version The current default miniboot version.
Product ID Register The register number of the product ID.
Hardware Revision Register The register number of the hardware revision.
CPLD Revision Register The register number of the CPLD revision.
XFP Module ID The ID number of the XFP module.
show chassis Displays the basic configuration and status information for the switch
chassis.
show cmm Displays the basic hardware and status information for CMM modules
running in the chassis.
output definitions (continued)
To Next Page
Loading...
