Alcatel-Lucent OmniSwitch 6250 - Secondary Management Module Selection; Using the Stacking Connection to the Primary Switch

Power over Ethernet (PoE) Commands
page 4-8 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
alaPethMainPseGroup
alaPethMainPseMaxPower
lanpower power Specifies the maximum amount of inline power, in milli-
watts, allocated to a specific PoE port.
lanpower combo-port Displays current inline power status and related statistics for
all PoE ports in a specified slot.