IP Commands
page 29-20 OmniSwitch 6250 CLI Reference Guide November 2009
Examples
-> ip service all
-> ip service ftp telnet snmp
-> ip service port 1024
-> no ip service ftp snmp
-> no ip service all
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaIpServiceTable
alaIpServiceType
alaIpServicePort
alaIpServiceStatus
alaIpPortServiceTable
alaIpPortServicePort
alaIpPortServiceStatus
telnet 23 enabled
udp-relay 67 enabled
http 80 enabled
network-time 123 enabled
snmp 161 enabled
secure-http 443 enabled
show ip service Displays a list of all well-known TCP/UDP ports and their current
status (enabled or disabled).
service name port Status
To Next Page
Loading...
