IPv6 Commands
page 30-30 OmniSwitch 6250 CLI Reference Guide November 2009
Administrative status = Enabled
Operational status = Active
Hardware address = 00:E0:B1:C2:EE:87
Link-local address(es):
fe80::2d0:95ff:fe12:f470/64
Global unicast address(es):
212:95:5::35/64
Anycast address(es):
212:95:5::/64
Joined group addresses:
ff02::1:ff00:0
ff02::2:93da:68lb
ff02::1
ff02::1:ff00:35
Maximum Transfer Unit (MTU) = 1500
Neighbor reachable time (sec) = 538
Base reachable time (sec) = 360
Retransmit timer (ms) = 1000
DAD transmits = 1
Send Router Advertisements = No
Maximum RA interval (sec) = 600
Minimum RA interval (sec) = 198
RA managed config flag = False
RA other config flag = False
RA reachable time (ms) = 30000
RA retransmit timer (ms) = 1000
RA default lifetime (sec) = 1800
RA hop limit = 64
RA send MTU option = No
RA clock skew (sec) = 600
Packets received = 215686
Packets sent = 2019
Bytes received = 14108208
Bytes sent = 178746
Input errors = 0
Output errors = 0
Collisions = 0
Dropped = 0
output definitions
IPv6 interface index IPv6IfIndex value that should be used in SNMP requests pertaining to
this interface.
Administrative status Administrative status of this interface (Enabled/Disabled).
Operational status Indicates whether the physical interface is connected to a device
(Active/Inactive).
Hardware address Interface’s MAC address.
Link-local address Link-local address assigned to the interface.
Global unicast address(es) Global unicast address(es) assigned to the interface.
Joined group address(es) Addresses of the multicast groups that this interface has joined.
Maximum Transfer Unit Interface MTU value.
Send Router Advertisements Indicates if the router sends periodic router advertisements and
responds to router solicitations on the interface.
Maximum RA interval (sec) Maximum time between the transmission of unsolicited router adver-
tisements over the interface.
To Next Page
Loading...
