DHCP Relay Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 32-37
Examples
-> ip helper dhcp-snooping binding disable
-> ip helper dhcp-snooping binding enable
-> ip helper dhcp-snooping binding 00:2a:95:51:6c:10 port 1/15 address 17.15.3.10
lease-time 3 vlan 200
-> no ip helper dhcp-snooping binding 00:2a:95:51:6c:10 port 1/15 address
17.15.3.10 lease-time 3 vlan 200
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
iphelperDhcpSnoopingBindingStatus
iphelperDhcpSnoopingBindingTable
iphelperDhcpSnoopingBindingMacAddress
iphelperDhcpSnoopingBindingIfIndex
iphelperDhcpSnoopingBindingIpAddress
iphelperDhcpSnoopingBindingLeaseTime
iphelperDhcpSnoopingBindingVlan
iphelperDhcpSnoopingBindingType
ip helper dhcp-snooping
binding timeout
Configures the amount of time between each automatic save of the bind-
ing table contents to a file on the switch.
ip helper dhcp-snooping
binding action
Synchronizes the contents of the DHCP Snooping binding table with the
contents of the dhcpBinding.db file saved on the switch.
To Next Page
Loading...
