QoS Policy Commands
OmniSwitch CLI Reference Guide November 2009 page 39-25
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaQoSServiceTable
alaQoSServiceName
alaQoSServiceSource
alaQoSServiceIpProtocol
alaQoSServiceSourceIpPort
alaQoSServiceSourceIpPortEnd
alaQoSServiceDestinationIpPort
alaQoSServiceDestinationIpPortEnd
alaQoSAppliedServiceTable
alaQoSAppliedServiceName
alaQoSAppliedServiceSource
alaQoSAppliedServiceIpProtocol
alaQoSAppliedSourceIpPort
alaQoSAppliedSourceIpPortEnd
alaQoSAppliedServiceDestinationIpPort
alaQoSAppliedServiceDestinationIpPortEnd
policy service group Configures a policy service group, which is made up of policy services.
policy condition Creates a policy condition.
qos apply Applies configured QoS and policy settings to the current configuration.
show policy service Displays information about policy services configured on the switch.
To Next Page
Loading...
