Policy Server Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 40-5
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you change the port number, another entry is added to the policy server table; an existing port number is
not changed. To remove a port number, use the no form of this command with the relevant policy server
IP address and the port number you want to remove.
Examples
-> policy server 222.22.22.2 port 345 user dirmgr password secret88 searchbase
ou=qos,o=company,c=country
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
DIRECTORYSERVERTABLE
directoryServerAddress
directoryServerPort
directoryServerAdminStatus
directoryServerPreference
directoryServerUserId
directoryServerAuthenticationType
directoryServerPassword
directoryServerSearchbase
directoryServerEnableSSL
parameter default
admin up
port_number 389 (SSL disabled)
636 (SSL enabled)
preference 0
ssl | no ssl no ssl
show policy server Displays information about policies downloaded from an LDAP server.
To Next Page
Loading...
