Policy Server Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 40-9
Release History
Release 6.6.1; command was introduced.
MIB Objects
directoryServerTable
directoryServerAddress
directoryServerPort
directoryServerPreference
directoryServerAuthenticationType
directoryServerSearchbase
directoryServerUserId
directoryServerPassword
directoryServerCacheChange
directoryServerLastChange
directoryServerAdminStatus
directoryServerOperStatus
Enabled Whether or not the policy server is enabled via the PolicyView applica-
tion.
Operational status The state of the policy server, Up or Down.
Preference Determines which directory server is used for policy downloads when
multiple servers are configured. The range is 0–255. The server with
the highest value is used as the policy server. If that server becomes
unavailable, the server with the next highest preference value is used
for policy downloads.
Authentication Displays password if a user name and password was specified for the
server through the policy server command. Displays anonymous if a
user name and password are not configured.
login DN The directory user name.
searchbase The searchbase name, which is the root of the directory that will be
searched for policy download information.
Last load time The date and time that policies were last downloaded. Values of zero
indicate that no policies have been downloaded.
output definitions (continued)
To Next Page
Loading...
